Bleed Size and Safe Zone
In every product description, the bleed size and safe zone requirement are listed. Each product may differ.

Bleed Requirement:
EXAMPLE
If your actual product size is 89mm x 54mm,
you will need to add the bleed size (1.5mm on each side):

89mm + (1.5mm x 2) = 92mm
54mm + (1.5mm x 2) = 57mm

Safe zone means:
The safe zone is the area where all the most important, critical elements (such as text, images, logos, etc) are placed. Making sure they are within the safe zone is the only way to avoid these elements from being trimmed off once the product is trimmed to the final size.

If you actual product size is 89mm x 54mm, the safe zone (4mm away from each side) shall be:
89mm – (2mm x 2 sides) = 85mm
54mm – (2mm x 2 sides) = 50mm

NOTE:
When saving your file for print, remove all guidelines. Our preflight system is unable to check your safe zone contents. As such, it will be printed as per your print file and will not qualify for reprint if your contents outside the safe zone are cut off.